Skip to content
MATERIALS TESTING

How do we test in detail?

Our material testing is tailored to your needs and stands for the highest reliability. With state-of-the-art technology and proven methods, we ensure that your material is thoroughly and accurately tested. Our competent team has extensive expertise and years of experience to guarantee precise and meaningful results.

Trust our expertise when it comes to individual testing requirements, quality, and care. Your satisfaction and the success of your project are our top priorities!.

Anchor: microstructure

Microstructure

The properties of a material are determined not just by its chemical composition but also by its structure and micro­structure. Our metallography experts are here to support you with the analysis and assessment of the following parameters:

Anchor: chemical-composition

Chemical composition

Is the composition correct? How much hydrogen does your steel contain? We are glad to address these and other questions using the following methods:

Anchor: trace-analyses

Trace analyses

Are heavy metals present in your sample? How high is the iron content of your electrolyte? Or which plasticizers are present in a polymer?

We will conduct a trace analysis for you, using state-of-the-art analytical methods like:

Anchor: mechanical-properties

Mechanical properties

Our mechanical testing offers a comprehensive analysis of various mechanical properties of your materials. We evaluate both standard and special samples.
Our team of experts works flexibly and precisely to ensure that all relevant parameters are accurately recorded and evaluated.

Anchor: chemicophysical-tests

Chemicophysical tests

With our chemicophysical tests, we can give you a com­pre­hen­sive insight into the properties of your materials:

Which questions are frequently asked about materials testing?

How do I find a suitable test method for my specific issue?

Discuss your concerns with our experts. They will be happy to help you determine the best course of action.

How many samples should be tested?
This depends on the specific question: A comprehensive test ideally consists of 3 samples from 3 different production batches. In case of issues, we recommend comparing 3 “bad samples” with 3 “good samples.” This also provides a certain level of statistical reliability.
I'm not sure what exactly my problem is or how to phrase it. Am I still in the right place at RMS?
Absolutely! We'll go over the issues with you and collaborate to get to the underlying causes. Once a potential solution is identified, we’ll be happy to conduct the necessary testing.
What does the RMS Foundation need in order to conduct an analysis?
Typically, we require the sample material and a binding test order. This can be a formal order based on a quotation or even an informal e-mail.
What do the services of the RMS Foundation cost?
The nature and number of samples can have a major influence on the test costs. We will be happy to provide you with a quote tailored to your specific inquiry.
I urgently need an analysis. Can I bring my samples to the RMS Foundation right away?

You are welcome to drop off your samples. Just give us a quick call beforehand and we’ll take care of them. Depending on our workload, we’ll process them right away. If it's extremely urgent, we also offer express services.

Are the services offered accredited?
Yes, our services are validated and accredited in accordance with ISO/IEC 17025. If a required service has not yet been validated, we can easily validate it for you.
How long does it take until I receive my results?

We usually process smaller orders within 10 working days (within the limits of our technical and human resources). Contact us for clarification of prioritized processing for an additional charge. For larger projects, we will be happy to propose a customized schedule.

How do I get my results?

We usually communicate the test results to you in the form of a test certificate. If desired, we can prepare a more detailed report for you in which we can statistically process and interpret the results and/or make recommendations. We will be happy to send you both with a digital signature.

How does the RMS Foundation ensure the confidentiality of my data?

As an ISO/IEC 17025 accredited laboratory, confidentiality is our top priority. Further information on how we handle your data can be found in our General Terms and Conditions. Please contact us regarding additional protective measures for particularly sensitive data.

mark of execution-1 mark of execution-1

«We value the broad expertise in consulting and testing — a partner for many topics. Fast, personal, close, and competent — that's why we enjoy working with RMS.»

 

Marcel Estermann
Head of Development and Production, Member of the Management Board,
Thommen Medical
mark of execution-1 mark of execution-1

«The expertise and resources of the RMS Foundation enabled us to deepen our knowledge of our ceramics. This has helped, and continues to help, in the development and optimization of our manufacturing processes. The open and creative exchange and mindset were key contributors to the success of our collaboration.»

 

 

Thomas Gyger
Materials Engineer, Bangerter Microtechnik AG
mark of execution-1 mark of execution-1

«The RMS Foundation is an important partner for us because of its long-standing and profound expertise in medical technology, as well as its ISO 17025 certification. We value our collaboration with the RMS Foundation because we are highly appreciated as a customer, and communication is always straightforward and pleasant. The network with the RMS Foundation and other companies in the canton is economically significant for us, as the short distances save us a lot of time and help avoid potential misunderstandings.»

 

Patrick Burki
Head of R&D, 41medical
mark of execution-1 mark of execution-1

«Collaboration with the RMS Foundation is very enjoyable, particularly the highly professional SEM analyses performed by the well-qualified and helpful experts. Even with the most urgent and short-notice requests, we are always served with great courtesy. Deadlines are crucial, and we have never been let down by RMS in this respect.»

 

Dr. Johann Rechberger
Head of Materials and Surface Technology, Fraisa
mark of execution-1 mark of execution-1

«Thank you and your team for the great work, looking forward to working with you again!»

 

Amaury Migeotte
R&D Engineer, NOVOSTIA
mark of execution-1 mark of execution-1

«Thank you very much for the comprehensive report and professional support. I am, once again, thrilled with the quality of work at RMS. The results are very helpful to us and help us gain a better understanding of our challenges.»


 

Justus Schällibaum
Senior Process Development Engineer, Sonova AG
mark of execution-1 mark of execution-1

«Collaboration with the staff of the RMS Foundation is pleasant, straightforward, and solution-oriented. They are highly trained and have a vast knowledge base, offering us guidance and support.»

 

Ulrike Füss
Head of Analytics & QP, Borer Advanced Cleaning Solutions
mark of execution-1 mark of execution-1

«We appreciate working with the RMS Foundation because we depend on quick and top-quality analyses, and the RMS Foundation consistently provides them.»

 

Tobias Moser
CEO / Head of Sales, Galvano Wullimann Metallveredelung
mark of execution-1 mark of execution-1

«Over the past few years, we have utilized RMS's services multiple times. We value our collaboration with the RMS Foundation because it allows us to easily access high-standard analytical methods of scientific quality.»

 

Carlo Weingart
MC Micro Crystal Switzerland
Roman_Heuberger_1850x1233

Who is your contact person?

Roman Heuberger
Dr. sc. ETH Zurich, Certified Materials Engineer ETH
Head of Materials Testing and Consulting
+41 32 644 2022