Skip to content
EN
RMS REPORTS

Reports of the RMS Foundation

RMS Report 2025

As soon as the RMS Report 2025, covering the activities from 2022 to 2024, becomes available, you can download it here. For a printed copy, please contact us.

Previous RMS-reports

You can download all previous RMS reports here.

You might also be interested in

Our certifications

Since 1995, the services of our materials testing laboratory have been accredited according to ISO/IEC 17025. Our QM system is ISO 9001 certified.
NEWS

Latest news

Here you will find our latest blog posts.
IL-5: Is the strength sufficient – is the deformation permissible?
IL-5: Is the strength sufficient – is the deformation permissible?
Mechanical tests in the RMS The RMS has a broad experience in static and quasistatic tests under tensile, compressive, bending or torsional loads as...
IL-4: Chemical surface analysis with XPS
IL-4: Chemical surface analysis with XPS
The X-ray photoelectron spectroscopy, short XPS, utilises the photoelectrical effect (figure 1): X-rays are used to excite the electrons in a...
IL-2: Do you know the fatigue strength of your components?
IL-2: Do you know the fatigue strength of your components?
The RMS has a series of appliances at its disposal. Among them are those for the uniaxial and multiaxial dynamic testing of material specimens,...
IL-16: Cleanliness of medical devices
IL-16: Cleanliness of medical devices
The scientists of the RMS Foundation focused for many years on the toxicological assessment of biomaterials only. While biocompatibility assessments...
IL-6: Scanning Electron Microscope (SEM) and chemical analysis (EDX)
IL-6: Scanning Electron Microscope (SEM) and chemical analysis (EDX)
In the scanning electron microscopy, we use a focussed electron beam to scan the surface of a specimen in vacuo. This emits the secondary electrons...
IL-7: Scanning Electron Microscopy (SEM) and application fields
IL-7: Scanning Electron Microscopy (SEM) and application fields
As a special possibility, the SEM of the RMS Foundation offers the three-dimensional recording and depiction of surfaces as well as the calculation...
IL-10: Contact Angle Measurements in the RMS Foundation
IL-10: Contact Angle Measurements in the RMS Foundation
The contact angle of a drop on a surface strongly depends on the chemistry of the surface and on the test liquid: If both are polar (e.g. a water...
IL-11: Surface analysis of a medical instrument
IL-11: Surface analysis of a medical instrument
The discoloured surface of the forceps couldn’t be removed with an acid pickling process and was only with mechanical grinding to remove, what cannot...
IL-15: Notch impact test: Measurement of the charpy impact toughness
IL-15: Notch impact test: Measurement of the charpy impact toughness
Products like surgical instruments (rasps, impactors, etc.) may be subjected to hammer strokes depending on the specific application. Therefore, they...
IL-17: Particle Size Analysis by Laser Diffraction
IL-17: Particle Size Analysis by Laser Diffraction
Principle: The static light scattering (laser diffraction) is a simple and fast measurement principle. The sample (powder, particles, etc.) passes a...
CONTACT

How to contact us

RMS Foundation
Bischmattstrasse 12
2544 Bettlach
Switzerland

Phone +41 32 644 2000
E-Mail
Contact form Analyis request Application form research grant

Would you like to stay informed?

Subscribe to our Info-letter, and we will inform you about 10 times a year about current developments in the fields of material testing, research, and knowledge transfer.

Anchor: kontakt

Contact us